게시판

OEM / ODM Partnership

OEM process

OEM process

  • inquiry

  • counseling

  • contract

  • Development

  • warehousing

  • manufacture

  • delivery

ODM process

Contact us

Hadong - Head Office
(Production, R&D)

  • 50-1 Ipseok-gil, Agyang-Myeon, Hadong-Gun, Gyeongsangnam-Do 667-813, Republic of Korea

  • +82 70.4656.0891
  • +82 55.722.7225
  • jadeleetea.korea@gmail.com

Gyeonggi Office
(International Sales & Distribution)

  • F3 144, Sicheong-ro, Gwangmyeong-si, Gyeonggi-do, 14226, Republic of Korea

  • +82 10.9005.8433
  • +82 2.2688.3015
  • jadelee.kai@gmail.com

상단내용 입력 영역

What makes the 1965-1969 Avanti iI so Unique?

Linnie
2025.11.30 06:44 8 0

본문

:

pexels-photo-33226356.jpegWhat makes the 1965-1969 Avanti II so unique? Not many cars get a second chance at life after the original manufacturer expires. When Studebaker left its long-time home at South Bend, Indiana, early in 1964, to make a final stab at success up in Ontario, the futurethink Avanti seemed doomed after a mere two-year existence. Even the greatest cars, after all, cannot survive unless someone chooses to build them. Leo Newman and Nathan (Nate) Altman, long-time partners in a South Bend Studebaker-Packard dealership, had a great notion -- and wound up saving the dramatically different coupe from extinction. Not only did the two buy the rights to the Avanti name and its manufacture, they purchased a portion of an abandoned Studebaker factory, forming a brand-new Avanti Motor www.PrimeBoosts.com Corporation. Late in 1965, production began at the revitalized plant on Lafayette Avenue, with a goal of building 300 Avanti IIs yearly. Such success is all the more surprising when you consider that the original Avanti wasn't exactly a sizzling seller.



Anatomy+I.jpgAttention it drew, enhancing Studebaker's image; but as other manufacturers also have learned, trevorjd.com sales don't necessarily follow achievements on the race course or record-setting 170-mph jaunts. Had the original Avanti been made of steel instead of fiberglass, its resurrection might have been impossible. Using body panels supplied by the Molded Fiber Glass Body Company and a mini assembly line, the revived Avantis could be built for a reasonable cost. Spread along that line were a host of former Studebaker employees, willing to work for modest wages in exchange for an opportunity to turn out custom-built sport-luxury touring cars. Not only did Avanti compile an option list that would be the envy of rival automakers, but a customer could dicker for just about anything his or her heart desired. Colors? The rainbow was the limit. Fabrics? Just about anything that could be sewn into seats might be ordered -- with stitchwork performed by a former Studebaker craftsman. Naturally, Avanti had to abandon the original R-series Studebaker engines, turning to readily available Chevrolet drivetrains: specifically, the Corvette 327-cid V-8.



Power-shift automatic allowed manual runs through first and second gears, but plenty of buyers opted instead for a fully synchronized Borg-Warner four-speed, often accompanied by a Hurst shifter. To learn how the 1965-1969 Avanti II compares to the original Avanti, go on to the next page. Profile and detailing changed little, except that the new one sat more level on the ground. The early "rake" (front end lower than the rear) was gone. Otherwise, the revived coupe displayed the same grille-less nose, sharp-edged front fenders, slim bumpers, and "Coke-bottle" profile, with only a slight narrowing of front wheel openings. Front disc brakes provided fade-free stopping power. Road-testers gave it high marks for safety, silence, and a firm but comfortable ride. While the original Avantis had focused on performance, the new ones qualified as four-seat "personal luxury" machines, partly due to higher prices. Whereas the original had sold for $4,445, the Avanti II started at $7,200 -- or as little as $6,550 if the buyer agreed to do without a few standard items.



Throw in a full load of options, and the sticker could approach 10 grand. Available equipment included air conditioning, power windows, tinted glass, Eppe driving lights, limited-slip differential, Magnum 500 chromed wheels, and plenty more. Inside, $200 bought an upgrade to textured "Raphael vinyl," while $500 was the price for all leather. This is not to say, however, that the Avanti had become a slouch. Top speed registered at around 125 mph, and a "II" with automatic could accelerate to 60 mph in less than nine seconds. Eugene Hardig, who'd been the last Chief Engineer at Studebaker, was responsible for keeping the engine "legal" as it grew to 350-cid displacement in 1969, and later to 400 cid. Following the death of Nate Altman in 1976, a succession of owners have manned the Avanti helm. And though the future of the company has at times looked bleak, the car itself has remained true to the styling theme penned over four decades ago -- a convincing testament to its timeless design. For 1965-1969 Avanti II specifications, go on to the next page. Only true connoisseurs can tell the difference between Avanti IIs and the original Avanti by Studebaker.

댓글목록 0

등록된 댓글이 없습니다.
image

Good Energy, Good People.

아시아 No.1을 넘어 세계를 향하는
Leading Company

  • 01

    에너지 펀드 가입 방법

    저희 기업에서는 에너지 펀드를 받고 있습니다.
    환경과 에너지를 생각하시는 분들을 모십니다.

  • 02

    사회공헌

    저희 기업에서는 사회공헌에 노력하고 있습니다.
    보다 좋은 세상을 위해 노력하는 기업이 되겠습니다.

  • 03

    교육 기관 견학 신청

    저희 기업에서는 교육기관 및 단체의 견학 신청을 받습니다.
    에너지의 생산과 활용 및 발전에 대해 견학해 보시기 바랍니다.

  • 04

    오시는 길

    서울특별시 목동서로 5200 하이퍼그룹 23층
    [전화번호] 02.1234.1234
    [팩스] 02.3434.3434